Kami menawarkan berbagai macam produk yang terbuat dari baja galvanis dan stainless steel, yang dirancang untuk memenuhi kebutuhan Anda. Berikut ini adalah beberapa contoh spec sheet untuk produk kami:

Type 442 – Galvanized
Part No.: 138041
Length (m): 19.69 (0.5)
Slot size: 18.6 x 9.0 in2
Intake area: 9.0 ft²
Weight: 18.0 lbs

Type 482 – Galvanized Access Unit
Part No.: 138042
Length (m): 19.7 x 0.47
Slot size: 9.3 x 16.4 in2
Intake area: 12.4 ft²
Weight: 24.8 lbs

Type 443 – Stainless
Part No.: 138045
Length (m): 39.37 (1.0)
Slot size: 39.4 x 0.47
Intake area: 18.6 ft²
Weight: 36.3 lbs

Type 444 – Stainless
Part No.: 138046
Length (m): 19.69 (0.5)
Slot size: 18.6 x 9.0 in2
Intake area: 9.0 ft²
Weight: 18.0 lbs

Type 484 – Stainless Access Unit
Part No.: 138047
Length (m): 19.7 x 0.47
Slot size: 9.3 x 16.4 in2
Intake area: 12.4 ft²
Weight: 24.8 lbs

Heel-Resistant Brickslot 100 Steel
Part No.: 138050
Length (m): 39.37 (1.0)
Slot size: 39.4 x 0.3 in2
Intake area: 24.8 ft²
Weight: 28.2 lbs

Kami juga menawarkan produk yang lain, seperti:

• Type 470 – Galvanized: Part No. 138050, Length (m): 19.69 (0.5), Slot size: 24.8 x 9.2 in2, Intake area: 11.0 ft², Weight: 18.0 lbs
• Type 471 – Galvanized Access Unit: Part No. 138052, Length (m): 19.7 x 0.3, Slot size: 12.4 x 11.0 in2, Intake area: 12.4 ft², Weight: 24.8 lbs
• Type 472 – Stainless: Part No. 138055, Length (m): 39.37 (1.0), Slot size: 39.4 x 0.3 in2, Intake area: 24.8 ft², Weight: 28.2 lbs
• Type 473 – Stainless: Part No. 138056, Length (m): 19.69 (0.5), Slot size: 24.8 x 9.2 in2, Intake area: 11.0 ft², Weight: 18.0 lbs
• Type 485 – Stainless Access Unit: Part No. 138057, Length (m): 19.7 x 0.3, Slot size: 12.4 x 11.0 in2, Intake area: 12.4 ft², Weight: 24.8 lbs

Untuk informasi lebih lanjut tentang produk kami, silakan hubungi kami melalui email atau phone.

Note: Load Class C (EN 1433) – 56,202 LBS – 967 PSI (Commercial Vehicle Traffic)

Disclaimer: The information presented in this spec sheet is accurate to the best of our knowledge. However, it is subject to change without notice. It is your responsibility to ensure that the product meets your specific requirements.