E-tel Q20 MT6580 Flash File Firmware (Tested)
Spesifikasi
- Android 5.1
- 3G
- Quad-core 1.3GHz Cortex-A7 Processor
- 7” Display
- 8GB ROM, 1GB RAM
- MMC supports up to 32 GB
- Wi-fi/Wi-Fi Hotspot
- GPS/Maps/Youtube
- Camera: 2.0MP + 0.3MP Front
- Battery: 2800 mAh
Password
Untuk mendapatkan password, silakan hubungi kami pada nomor 076 96 56 196.
Flash File Firmware Lainnya
7, Flashing errors-alcatel onetouch pop c5 5037x
Permasalahan Flashing Alcatel One Touch Pop C5 5037X
I tried to flash my alcatel onetouch pop c5 5037x using SP Flash Tool v5.1612, but I got an error "PMT changed for the room it must be downloaded". Then, I used the "format" tab and formatted the phone using the default options. However, when I tried to flash again using "download only", I got another error "BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (0x3f3).
I also tried using Format+Download and Firmware Upgrade, but still no luck.
Solusi
Hovatek suggested that the issue is a preloader (software) / EMMC (hardware) level issue. He asked several questions to help troubleshoot the problem:
- Can you get access to a working phone of the same model?
- Have you tried using a different firmware?
- How did the phone get bricked in the first place?
Bagian Penting
MT6572_Android_scatter.txt is the file which originally comes with all the .bin files and gives "BROM ERROR: s_not_enough_storage". I replaced the scatter file with MT6572_Android_scatter_emmc.txt and used the previous .bin files, and it flashed successfully. However, after flashing, only the logo and recovery can be seen.
I then edited MT6572_Android_scatter.txt using Notepad++ by comparing both scatter files using Scatter Analyzer. I deleted some of the unnecessary partitions (EBR2, CUSTPACK, MOBILE_INGO) since I don't have their .bins in the firmware. By deleting the scatter file, it has been easily flashed, but again only the logo can be seen.
Pertanyaan
When I format my whole phone, what is important: recovery.img or recovery.bin? I noticed that if I flash recovery.bin only, I can get into recovery after flashing using the power and vol+ key, but not with the recovery.img. Also, system.img or system.bin, boot.img or bootimg.bin?
Laporan
I managed to flash my phone by using Hovatek's scatter emmc file, and the phone can switch ON, but it is stuck at the Alcatel logo.
Phone info:
- Alcatel One Touch Pop C5 5037X
- TCT Mobile Limited
- 5037X – 2ADHMY1
- Firmware Version: Android 4.2.2
- Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V1.F1.P24
Kontak
Jika Anda memiliki pertanyaan atau permasalahan yang sama, silakan hubungi saya melalui email [email protected].