As a user of the Andromax B16C2, it is essential to know how to download and use the scatter file. This article will guide you through the process of downloading the scatter file and flashing stock ROM using the SP Flash Tool.

What is a Scatter File?

A scatter file is a .txt file that describes various regions in an Android device running on MediaTek's ARM architecture. It is typically required when flashing firmware using tools like the SP Flash Tool.

Download Scatter File for Andromax B16C2

To download the scatter file, follow these steps:

1. Go to [website URL] and navigate to the "Download" section.
2. Search for "Andromax B16C2 Scatter File".
3. Click on the link to download the scatter file (e.g., MT6735M_Android_scatter.txt).
4. Save the file to a directory of your choice.

How to Create Scatter File using MTK Droid Tools

To create a scatter file, follow these steps:

Prerequisites:

1. Your Android device should be based on the Mediatek ARM structure.
2. A USB cable.
3. You need a PC to perform this setup.
4. Download and install the latest version of the MTK Droid Tools on your Windows PC (see our post on [Download MTK Droid Tool [Latest Version Available]]).
5. Install the drivers for your Android device on your Windows PC.

Steps:

1. Run the MTK Droid Tool.exe file on your PC.
2. Connect your Andromax B16C2 to your PC via a USB cable.
3. Enable USB debugging mode on your device (Settings > About Phone > Build Number > tap 7 times, then go back and enable Developer Options).
4. Once you see your device's info on the MTK Droid Tool, click on the "Blocks Map" button.
5. Click on the "Create Scatter" button.
6. Select a directory to save your scatter file and click "Save".
7. Disconnect your Andromax B16C2 from your PC.

How to Flash Stock ROM using SP Flash Tool

To flash stock ROM, follow these steps:

Prerequisites:

1. Your Android device should be based on the Mediatek ARM structure.
2. A USB cable.
3. You need a PC to perform this setup.
4. Download and install the latest version of the SP Flash Tool (see our post on [Download SP Flash Tool [Latest Version Available]]).
5. Install the drivers for your Android device on your Windows PC.

Steps:

1. Run the SP Flash Tool.exe file on your PC.
2. Connect your Andromax B16C2 to your PC via a USB cable.
3. Select "Download" mode in the SP Flash Tool.
4. Choose the scatter file you downloaded earlier and select "Load".
5. Click on the "Download" button to flash the stock ROM.

Troubleshooting Tips

1. Make sure you have the correct scatter file for your device.
2. Ensure that your device is in download mode before flashing the ROM.
3. If you encounter any errors during the flashing process, try restarting the SP Flash Tool and re-flashing the ROM.

By following these steps, you should be able to successfully create a scatter file and flash stock ROM using the SP Flash Tool on your Andromax B16C2 device.